Incident Command - Live Demo

Tap to set address

00:00

1st Alarm

Offensive

Start

Whiteboard

Units

Building

Vehicles

Benchmarks

PAR

MAYDAY

Scene

Product

Operation

Zones

Air

Log

Today's roster 0 on duty

—

Crew

Tactical assignments

Available unitsDrag a unit onto a column to assign it.

ReadyLine Response Solutions · Incident Command

This app is a decision-support and documentation aid only. It does not replace your department's SOPs/SOGs, radio communications, personnel accountability system, or established incident command procedures.

The Incident Commander and the fire department remain solely responsible for all command decisions, scene safety, and firefighter accountability. Always verify critical information by radio and face-to-face PAR. Do not rely on this app as a sole or primary means of accountability or life-safety tracking.

The app is provided "AS IS," without warranties of any kind. ReadyLine Response Solutions LLC does not guarantee it will be accurate, available, uninterrupted, or error-free. To the maximum extent permitted by law, ReadyLine Response Solutions LLC is not liable for any loss or damages arising from use of this app.

Privacy: All incident data is stored locally on this device — nothing is sent to ReadyLine servers. Addresses you enter for mapping are sent to OpenStreetMap's geocoding service (and Photon, komoot's OpenStreetMap search, as a backup) to look up locations.

I have read and agree to these terms, and understand this app does not replace established command and accountability procedures.

Department Identity

Department Name

Short Name / Initials

Tagline (optional)

Country code for map bias (optional)

Helps the map find the right address when there are duplicates in other countries.

Personnel on apparatus

When ON, each unit has seat positions to staff with crew names. When OFF, the roster shows units only — no individual crew management.

Box alarm levels

How many alarm levels to cycle through (1st Alarm → 2nd → etc).

Default incident type

Pre-selects an incident type when starting new incidents. "Always ask" shows the picker each time.

Default tab on startup

Which tab is shown when the incident screen loads.

Enable map geocoding

When ON, the incident address is sent to OpenStreetMap (and Photon as a backup) to load the map. Turn OFF if your department cannot share address data with third-party services.

EV tab tactical notes

When ON, the EV tab (MVA) shows short tactical notes from FSRI EV fire research and NHTSA: the battery-involved notes, special situations and the cut and crush warning. Turn OFF if your department uses its own EV guidance. The checklists and records stay either way.

Roster name display

How personnel names appear on the roster and picker. Names are always stored exactly as entered/imported — this only changes the display and order.

Auto-start timer

When ON, the incident timer starts automatically on your first action (benchmark, LCAN report, dispatch). When OFF, you must start it manually.

Prompt for location on interior assignment

When ON, dragging a unit into an interior assignment (Fire Attack, Search, RIT, Ventilation) immediately asks for its location — best for accountability. When OFF, the unit is assigned without interrupting; unplaced interior units show an amber Set location flag so you can set it later with the location button once things slow down.

Dispatch starts the incident timer

When ON, dispatching your first unit starts the incident timer. When OFF, dispatch won't start the clock — so you can stage units on the tactical board first. The timer still auto-starts on a tactical assignment, a benchmark, an LCAN, or PAR. (Requires Auto-start timer to be ON.)

PAR reminder interval

Default time between PAR accountability checks.

MAYDAY report format

Which capture format the MAYDAY tab deploys.

Strategy modes

Customize the modes the IC badge cycles through. One per line.

SCBA air management

Air-time chip thresholds (minutes on air). The chip turns amber and then red at these times; the bottle time is for reference.

AMBER AT

RED AT

BOTTLE (MIN)

LCAN report chips

Customize the quick-tap options for the C, A, and N categories. One per line. (L · Location uses the structured floor/side picker — not customizable here.)

CONDITIONS

ACTIONS

NEEDS

Radio Channels

Size-Up & 360 Reports

Customize the chip options for each report section to match your department's policy. Add custom sections for any extra information you radio in.

SIZE-UP REPORT

360 REPORT

Air Monitoring Action Levels

Colour thresholds for the Air & Entry gas readout. Match these to your meters' alarm setpoints. Defaults: O2 19.5–23.5% & LEL 10% (OSHA 1910.146); CO 35/200 ppm & H2S 10 ppm (NIOSH).

Appearance

Choose the look of the app. Auto matches the device — iPhone-style on iPhones, Android-style on Android phones.

Ranks

Rank abbreviations used in apparatus seats (e.g., BC, CAPT, LT, FF, MEDIC)

Stations

For multi-station departments. Add your stations here, then assign each apparatus to a station. Leave empty if you're a single-station department.

Apparatus

Your department's apparatus. Each has a short name (E-1) and crew seats.

Mutual Aid Partners

Neighboring agencies you may call. They appear as quick-add chips when adding mutual-aid units to a scene. List common units (optional) for one-tap.

Alarm Assignments (Run Card)

Personnel Roster

Enter names in the same format your scheduling software exports (e.g. Last, First or First Last). Whatever you use here is how they appear in the staffing picker.

Incident Templates

Pre-built benchmarks & tactical board for common incident types.

Incident Types

Customize the columns and benchmarks that load when you start each incident type.

Updates

Pull the newest app version and your department's latest configuration in one step. Your roster, apparatus, and saved incidents are kept.

Checking for updates...

Department Sync

Push this tablet's roster, apparatus, stations, and settings to your department so your other tablets receive them. Any tablet with the department key can push. Other tablets pull with the Update button above. Leave blank to keep this tablet fully local.

Not configured.

Backup / Restore

Save all settings and templates to a JSON file, or load from one.

This device keeps a copy of the settings before an update, an import or a reset changes them, and one each day (the newest 10).

Back up the active incident to a file (in case this device is lost), or restore one onto this device.

Past Incidents

Incidents you've ended are archived here — review, export a backup, or delete. Nothing is ever deleted automatically.

Loading…

Danger Zone

Reset everything — settings, templates, roster, incidents.

About

Incident Command v1.0 · build —

by ReadyLine Response Solutions LLC

Step 1 of 5

Template Info

Template Name

Description

Tabs Shown When Deployed

Show PAR tab Show MAYDAY tab Show Vehicle Damage tab Show Building tab Show EV / Alt-Fuel tab Show Product / Placard tab Show Rescue Operation tab Show Zone / Scene Control tab Show Air & Entry tab

When this template is deployed, these tabs appear or stay hidden. PAR and MAYDAY default off for Medical and MVA. Vehicle Damage and EV / Alt-Fuel show on MVA only by default. Product / Placard and Zone / Scene Control show on Hazmat by default; Rescue Operation on Tech Rescue; Air & Entry on both Hazmat and Tech Rescue. Building shows on all types except Medical.

Benchmark Categories

Tactical Board Columns

Default columns shown on the tactical board when starting from this template.

Scene Chips

Quick-add Hazard & Resource chips on the Scene tab. Type the full name (used in the log); add an optional short label for the button. Common chips show on every incident type; the per-type list shows only for this one.

Hazards — common (every type)

Hazards — this type only

Resources — common (every type)

Resources — this type only

Admin access

Your trial has ended